Wiring Schematic Diagram

This is a FM transmitter circuit with semiconductor Maxim MAX2606 IC. In the circuit of rated frequency is 100 MHz for L1 inductor (390nH). Signals from the left and right channels of audio from its origin are added by R3 and R4, and attenuated by R2 POT. R2 can be used as a volume control. POT R1 can be used to select a transmission channel between 88MHz and 80 cm cable 108Mhz.Use long as the antenna.

Note:
* Use a battery for powering the circuit.It will reduce noise.
* An FM antenna from a old radio is a better option than the wire antenna.

IC MAX2606 Description

The MAX2605, MAX2609 are compact, high performance intermediate frequency (IF) voltage-controlled oscillator (VCO) designed specifically for demanding portable wireless communication systems. They combine monolithic construction with low noise, low operating power consumption of a small 6-pin SOT23 package.

Low-noise VCO, a feature on-chip varactor and feedback capacitors that eliminate the need for external adjustment elements, so the ideal MAX2605, MAX2609 for portable systems. Only an external coil is needed to establish the frequency of oscillation. In addition, a buffer integrated differential output is provided for driving a mixer or prescaler. The output buffer is capable of providing up-8dBm (differential) with a simple power game. It also provides isolation from load impedance variations.

The MAX2605, MAX2609 operate from a single 2.7 V to 5.5 V supply and provides low power consumption. IF these oscillators can cover the frequency range of 45MHz to 650MHz.

IC MAX2606 Absolute Maximum Rating

• VCC to GND..............................................................-0.3V to +6V
• IND to GND ................................................-0.6V to (VCC + 0.3V)
• TUNE to GND .............................................-0.3V to (VCC + 0.3V)
• OUT+, OUT- to GND ..................................-0.3V to (VCC + 0.6V)
• Continuous Power Dissipation (TA = +85°C)
• 6-Pin SOT23 (derate 8.7mW/°C above +70°C)...........696mW
• Operating Temperature Range ...........................-40°C to +85°C
• Junction Temperature......................................................+150°C
• Storage Temperature Range .............................-65°C to +150°C
• Lead Temperature (soldering, 10s) .................................+300°C

This is an audio amplifier circuit provides power to 1000 watts Blazer. This interesting routes under a lot of good and lively treble. Importantly, you should choose the power source, which has been quite high voltage class GND-70V 70Vdc 10A is the current low level

The transistors are 2SC3858 (NPN) and 2SA1494 (PNP) and the bandwidth characteristic of high, excellent area of ​​safe operation, high linearity and high gain. 2SC5200 driver transistors (NPN) and 2SA1943 (PNP). All devices are rated at 230 V, with the power transistors has a dissipation of 150 W and the drivers are 50W.

This circuit describes a process amplifier, power supply and the tests that are inherently dangerous. Nothing described in this article should not even be considered unless a wealth of experience, we know exactly what you are doing and are willing to assume full responsibility for 100% of what you do. There are design issues that may require analysis, fault detection and / or modification.

This circuit can help you by keeping the mosquito and similar Insects and other creatures away from you using a high frequency sound produced by this circuit.

The main principle in the which this electronic mosquito repellent works Is that mosquito and Insects are highly sensitive to some frequency of sound and They Do not like the sound. And Insects and mosquito Will leave or get away from you due to the annoying sound. But the sound it produces is of a high frequency of the which can not be Heard by Humans so you will not be affected by the sound.

In the circuit timer IC 555 is used as it generates an oscillator frequency of about 62 KHz, the working frequency of the circuit can be set by rotating the preset resistor R2, and the speaker converts the electronic frequency to sound frequency. Try to keep the frequency of the sound as high as possible. And Make sure you do not Hear the sound of this circuit by keeping it above 20 KHZ, the annoying sound Will be Heard by Insects but not by you Because Humans do not normally Hear the sound of higher frequency than 20 KHz.

for better results use a speaker of good quality in the circuit, using good quality speaker Will Ensure That Will the project work.

Use this circuit to test if the light source coming from your 40khz IR emitter is actually giving out the best frequency. The schematic says to apply a GP1U5X ir module, however probably any 40khz detector module will work.

This is the circuit of a simple buzzer corrosion free water level indicator for home and industries. This circuit is very simple because it uses only two transistors and some passip Components are easily found circulating in the electronics stores.

When the water reaches the sensor, BC548C Transistor base is connected to the positive terminal. In consequence the transistor is opening and the buzzer it makes a buzz. Function: In the water level indicator, buzzer will be activated in order to make a noise when a certain level of water is being reached.