Sunday, June 27, 2010

Amplifier 250-500W with transistors MJ15003.



GENERAL DISCRIPTION :The circuit is based around (TL 071) manufactured by NATIONAL semiconductors (MJ15003) by ON semiconductors It is a high fidelity audio power amplifier. Designed for demanding consumer and pro-audio applications. You can also use this circuit with AV receivers, Audiophile power amps, Pro Audio High voltage industrial applications etc Amplifier output power maybe scaled by changing the supply voltage and number of output devices.

General Specifications
Rated Power Output
(20Hz to 20kHz Continuous Average Sine Wave)
250 watts into 8 ohms
500 watts into 4 ohms
Power Bandwidth
(250 watts into 8 ohms)
20Hz to 40kHz (0dB to -3dB)
Frequency Response
1 watt into 8 ohms
20Hz to 100kHz (0dB to -1.0 dB)
250 watts into 8 ohms
20Hz to 20kHz (Flat)
Input Sensitivity
+3 dBV
(1.4V RMS produces an output of 350 watts into 8 ohms)
Input Impedance
33K ohms, Unbalanced
Rise Time
2.0 microSeconds
Total Harmonic Distortion (THD)
Full Power(250 watts into 8 ohms)
Less than 0.007 % THD @ 1kHz
Less than 0.08 % THD @ 20Hz to 20kHz
Half Power (125 watts into 8 ohms)
Less than 0.003 % THD @ 1kHz
Less than 0.03 % THD @ 20Hz to 20kHz
10 watts into 8 ohms
Less than 0.003 % THD @ 1kHz
Less than 0.01 % THD @ 20Hz to 20kHz
[read here...]

Wednesday, June 23, 2010

FM Stereo Transmitter ( BH1415F )

This Electronic circuit is a stereo FM Transmitter based on BH1415F wireless audio link IC. Phase Locked Loop (PLL) controller use PIC16F628 and the the PLL frequency programming can be displayed with 8x2 and 16x2 LCD. Frequency Range 88-108 MHz

BH1415F can be supplied with 6 - 15V voltage, consumes only around 25mA while providing very sound quality and improved 40dB channel separation. BH1415 is only available in SOP22 IC case and this may be an inconvenience for some folks. On the other hand, because the chip is smaller than regular DIP-based ICs it is possible to fit the entire stereo coder on a small PCB.

[read here...]

Sunday, June 13, 2010

240VAC TO 5VDC POWER SUPPLY


This is simple way to power some 5v logic from a 240vac source. If a 120vac power adapter is used, the circuit will also work for 120vac power lines.


[read here...]